Travel Speakers K3000 for iPod and iPhone by PowerTraveller

Manufacturer Part Number: K3000BLK

The K3000 SoundTraveller is a versatile micro speaker designed for use with all iPods and a wide range of other digital devices.

K3000 SoundTraveller features a 3.5mm audio input socket and audio cable to allow the speaker to work with other audio devices such as MP3 players, PDAs, PSPs, CD & DVD players, etc.

High-efficiency DC-to-DC converter steps-up the 1.5V from AA battery to a 5V operating voltage.

The K3000 SoundTraveller is an energy-saving product – one battery will provide over 12 hours of playback when the volume is positioned mid-range.

The K3000 SoundTraveller powered speaker uses only 1 x AA battery. To fit, open battery compartment and insert in direction shown.

K3000 SoundTraveller comes with a USB cable to allow speakers to be connected to your computer via the USB port.

To use speaker, turn the power switch to the ON position, the LED on the front panel will display when active, then adjust volume wheel to required level.

When the speaker is not in use, please turn power switch to OFF position to prevent drainage of the battery, remove the iPod and replace the connector cover to protect from dust and damage.

Important:
Only use high-quality, anti-leakage alkaline batteries to avoid damage to the speaker. If any damage is caused to the speaker due to low-quality batteries being used, the company accepts no liability.
Please discard used battery in proper manner to avoid environmental pollution.
When the power LED flashes, the volume is too high – please lower accordingly.

Troubleshooting:
K3000 SoundTraveller is designed with a signal gain at 12dB – if you experience low volume when playing some songs, this may be because the song was recorded at a low volume.
If the speaker output is intermittent or distorted, the battery power may be low. Either lower the volume and continue listening or, if distortion continues, replace the battery.

Click here to read the full description...